低电流消耗EDFA模块Optilab-北京波威科技代理

EDFA Module with Low Current C***umption(EDFA-16-LC-M)

The Optilab EDFA-16-LC-M Module with Low Current C***umption (LC) is an ideal building block for photonic subsystems and OEM system integration.

Product Overview

The Optilab EDFA-16-LC-M Module with Low Current C***umption (LC) is an ideal building block for photonic subsystems and OEM system integration. Using a specifically qualified FBG stabilized, uncooled pump laser, this LC version of the EDFA module is designed for minimal electrical power c***umption and thermal loading. Under normal operating conditi***, this module will draw less than 2 W of power (5 V, 270 mA), and it requires only a single 5 VDC power supply for operation. Pump laser protection and alarms are equipped to ensure the reliabilty and safety of the EDFA-16-LC-M, and status monitoring and output power level adjustment is controllable via an RS-232 interface. Contact Optilab for more information.

Applicati***

◆Intelligent EDFA gain block

◆OEM integration

◆Photonic subsystems

◆Fiber optic link amplication

◆Instrumentation

Features

◆High-gain design allows low input signal level

◆Amplifier gain of up to 50 dB

◆Gain Flattening Filter (GFF) optional

◆Amplifies full DWDM channel range

◆980 nm and 1480 nm single mode pump

◆TEC cool pump lasers

◆15+ year operation life

◆Automatic Current Control (ACC) standard

◆3 year warranty standard

Feature Name

Description

Optical Specificati***

Operating Range

1528 nm to 1563 nm

Output Power

+10 to +16 dBm adjustable

Input Signal Level

-15 dBm to +3 dBm

Optical Gain

20 dB typ. @ -5 dBm input

Noise Figure

5.0 dB typ. @ -5 dBm input

Input Isolation

30 dB min.

Output Isolation

30 dB min.

Polar. Dependent Gain

1.0 ps max.

Polarization Dependent Gain

0.3 dB max.

Control Modes

ACC

Adjustable Features and Output

Control

RS232 for output power adjustment

Output Power Adjustment

Adjust by laser bias current

Mechanical Specificati***

Operating Temperature

-20°to +60°C

Power Supply

+5 V DC, 400 mA max.

Power C***umption

2 W max. 1.4 W typ.

Fiber Type

SMF-28

Fiber Jacket

900μm

Connector Type

FC/APC

Connector (power and control)

30 Pin Ribbon IDC Connector

Remote Control

RS-232 for laser control, status monitoring

Dimensi***

90 mm x 70 mm x 18 mm

Accessories Included

110 V - 240 V AC Adaptor for +5 V DC and cable